UltraFire WF-139 battery charger with two independent charging channels and adjustable compartments. Works with the following batteries 14500 / 17500 / 17670 / 18500 / 18650 / RCR123 3.7 volt rechargeable batteries.
EagleTac P20C2 MKII with the Cree XM-L LED Rated at an incredible 720 lumens with 524 OTF is powered by 2 common CR123A lithium batteries.
The updated P20C2 MKII Cree XM-L version has significant performance improvements. It offers an incredible 720 emitter lumens with 524 ANSI lumens. The P20C2 Mark II offers a new UI (user interface) that is perfect for professionals and the general public.
Features: Upgraded C2100 Light Engine with turbo boost output technology New upgraded rear switch mechanism and tail boot Redesigned detachable stainless steel clip, durable titanium coated Revised user interface (refer to operations below) Three levels output, activate by twisting head Three hidden modes (strobe, beacon, SOS), activated by twisting head Optional tactical strobe mode (disabled from factory). When enabled, operate by pressing rear switch twice Stainless steel bezel Syntax ultra-clear glass lens w/ harden and AR coating Type III finish / aerospace grade aluminum Light orange peel reflector for maximum output and a pleasing beam Gold and silver plated on all contacts Superior tactical knurling for a positive grip Tactical forward click tail-cap with momentary on/off function Heavy Duty Holster ET21 Diffuser glass filter with Syntax tough and AR coating Tail-standing rubber piece Mil-Spec Para cord Lanyard w/ quick attachment clip UP-L1
Specifications: Dimensions: Length: 5.1 inch (13cm), Body Diameter: 0.8 inch (2.1cm), Head Diameter: 1 inch (26cm) Body Weight (excluding batteries):2.8 ounces (79grams) Two CR123A lithium batteries (button-top cells only) Operating Voltage Range: 2.7V to 9V (button-top cells only) Runtimes and output: Low/General/Turbo: 100+/10/1.2 hours LED Lumen: 11/96/456(720) ANSI FL-1: 9/73/341(524)
Beam profile: Both XP-G and XM-L P20 models offer preciously machined aluminum reflectors coated in light orange peel finish for a smooth beam. XP-G gives a tighter and brighter center spot, while XM-L gives more overall light and has a larger center spot.
The P20A2 MKII is the next generation in cutting edge flashlight technology. Rated at an incredible 300 lumens with 230 OTF EagleTac is the first company to push the new XP-G to its fullest potential. With a new UI (user interface) this flashlight now works for both First Responders and the general public.
Flashlight operation:
Forward click switch, soft press for momentary or click for constant on. Change from high to general mode by twisting head. The tail switch activated strobe now comes disabled until the operator enables it with 15 continuous presses within 10 seconds. To deactivate strobe repeat the activation method. With the strobe enabled every other press goes to strobe. When left off for more than one second the circuit resets and starts on high again. There is a special hidden function which includes Low (5 lumen), Strobe, Beacon and SOS. The hidden modes are easily accessed by a double twist of the head when the light is on in either high or general mode.
Features:
Maximum output (OTF): 230 lumen / 60lumen / 15lumen
Runtime 1.5 hrs / 8hrs / 30hrs
Three levels of output activated by twisting the Head/Bezel
Tactical strobe is user enabled, convenient and easily accessible
CREE XP-G Premium R5 emitter - 300 emitter lumens
Crenulated Stainless Steel Bezel
Syntax ultra-clear harden/glass lens with AR coating
Mil-Spec Hard Anodized (Type III)
Smooth Precision Aluminum Reflector
Gold Plated contacts for the best conduction
Engineered for a comfortable grip with aggressive knurling
Tactical Forward click tail-cap, easily activated with gloves
The P20C2 MKII is the next generation in cutting edge flashlight technology. Rated at an incredible 380 lumens with 300 OTF EagleTac is the first company to push the new XP-G to its fullest potential. With a new UI (user interface) this flashlight now works for both First Responders and the general public.
Flashlight operation:
Forward click switch, soft press for momentary or click for constant on. Change from high to general mode by twisting head. The tail switch activated strobe now comes disabled until the operator enables it with 15 continuous presses within 10 seconds. To deactivate strobe repeat the activation method. With the strobe enabled every other press goes to strobe. When left off for more than one second the circuit resets and starts on high again. There is a special hidden function which includes Low (5 lumen), Strobe, Beacon and SOS. The hidden modes are easily accessed by a double twist of the head when the light is on in either high or general mode.
Features:
Maximum output (OTF): 300 lumen / 60lumen / 5lumen
Runtime 1.7 hrs / 13hrs / 180+ hr
Three levels of output activated by twisting the Head/Bezel
Tactical strobe is user enabled, convenient and easily accessible
CREE XP-G Premium R5 emitter - 380 emitter lumens
Crenulated Stainless Steel Bezel
Syntax ultra-clear harden/glass lens with AR coating
Mil-Spec Hard Anodized (Type III)
Smooth Precision Aluminum Reflector
Gold Plated contacts for the best conduction
Engineered for a comfortable grip with aggressive knurling
Tactical Forward click tail-cap, easily activated with gloves
Base Model: Stainless Steel Bezel, Diffuser Filter , Spare O-rings, GITD Switch Boot, Black Stainless Steel Pocket Clip, Heavy Duty Nylon Holster w/ Flip, Mil-Spec Para cord Lanyard w/ quick attachment clip, User Manual
The T20C2 MKII is the next generation in cutting edge flashlight technology. Rated at an incredible 380 lumens with 300 OTF EagleTac is the first company to push the new XP-G to its fullest potential. With a new UI (user interface) this flashlight now works for both First Responders and the general public.
Flashlight operation:
Forward click switch, soft press for momentary or click for constant on. Change from high to general mode by twisting head. The tail switch activated strobe now comes disabled until the operator enables it with 15 continuous presses within 10 seconds. To deactivate strobe repeat the activation method. With the strobe enabled every other press goes to strobe. When left off for more than one second the circuit resets and starts on high again. There is a special hidden function which includes Low (5 lumen), Strobe, Beacon and SOS. The hidden modes are easily accessed by a double twist of the head when the light is on in either high or general mode.
Features:
Maximum output (OTF): 300 lumen / 60lumen / 5lumen
Runtime 1.7 hrs / 13hrs / 180+ hr
Three levels of output activated by twisting the Head/Bezel
Tactical strobe is user enabled, convenient and easily accessible
CREE XP-G Premium R5 emitter - 380 emitter lumens
Crenulated Stainless Steel Bezel
Syntax ultra-clear harden/glass lens with AR coating
Mil-Spec Hard Anodized (Type III)
Smooth Precision Aluminum Reflector
Gold Plated contacts for the best conduction
Engineered for a comfortable grip with aggressive knurling
Tactical Forward click tail-cap, easily activated with gloves
The M2SC4 utilizes Cree MC-E K‐Bin Neutral White quad-die, a very powerful LED producing up to 700 lumens at the emitter. The M2 uses a simple rotary interface to select from 4 different modes. EagleTac designed a parallel battery orientation, allowing for a shorter design while providing enough power to run for quite a long time.
*SPECIAL*Free Diffuser lens and Optional M25 Clicky replacement kit. This feature will give you a rear tactical button with on/off in any desired mode. *Available while supplies last!
Updated UI (user interface) - Choose your last mode - Turbo, Tactical Strobe, Slow Strobe or SOS. To change modes - From off turn on fully then turn off and back on fully within two seconds to cycle through modes. Once you find the mode you want leave on for more than two seconds to memorize the mode.
The M25 Replacement Kit includes:
1 x M25 Clicky Tail
1 x M25 Clicky Module
1 x Retainer Ring (Pre-installed)
1 x Silicon Tail-Cap Boot (Pre-installed)
1 x Custom Fitting oring for water-proof
Spare Stainless steel mounting screws
Beam characteristics: Good balance of Flood with moderate throw
Operating the M2 is simple. At the base of the head is a digital rotary switch made from reinforced polycarbonate coated with smooth rubber. You just rotate the rubber ring to select the mode of output that you want:
Features:
Quad‐die Cree MC-E K‐bin Premium Neutral White LED emitter with up to 700 lumen
Constant Current Regulation Output C2800 Light Engine
Gold Plated Copper Contacts for Superior Conductivity and Durability
ET54 Aluminum Optical Reflector with mild OP finish
EagleTac M3C4 is the next generation in the Military Series replacing the EagleTac M2. The EagleTac M3C4 is a compact 11 Watt high output LED flashlight offering 1000 Bulb lumen with 800 O.T.F. lumen at turbo mode (SST-50 and triple XP-G R5 models) and a maximum of 100+ hours regulated runtime at the 15 lumen low output mode.
O.T.F. lumen output:
Triple CREE XP-G Cool White R5 LED: 15/55/172/393/800
Typical runtime:
1.5/3.5/8/28/100+ hours
Operation: Dial the operational ring to turn the flashlight on/off, adjust between the five brightness levels, and access the three hidden modes (strobe, fast beacon, SOS). To access the hidden blinking modes, turn the ring from the turbo mode to the off/standby mode, then back to the turbo mode within 2 seconds to cycle through the hidden modes.
New one-piece flashlight head design (from the top of the knurling area to the battery contact point behind the head)
This allows optimal LED hea tsink capability and operational reliability. The flashlight head is not sealed and user can gain access to the inside of the lens and reflector.
New durable hard HAIII anodized coating
The EagleTac Flashlight head and the body are o-ring and square-ring sealed for operation in harsh and wet environments. Reverse battery polarity protection has been implemented on the battery tray for each battery channel. The water-proof tail-cap now uses stainless steel 304 mounting screws with hex heads.
Included accessories:
CNC machined 304 Stainless steel bezel
Diffuser filter
Para-cord lanyard with pocket clips and split ring
The Fenix LD01 is extremely small and not much bigger than the AAA cell it uses. It has three modes: Medium -> Low -> High. These modes allow the user to select the best light output and runtime for any given task. The Fenix LD01 uses just one common AAA battery and thanks to its small size and weight, it is perfect for Every Day Carry (EDC). Moreover, its solid reliability has been tested and proven.
Capable of standing up securely on a flat surface to serve as a candle
Reliable twist-switch
Includes a spare o-ring, a split ring, and a pocket clip
Operation
Turn the head of the flashlight clockwise to turn on the flashlight. A counter-clockwise turn will then switch it off. To switch between output modes, turn the light on, then off and within 1.5 seconds after turning the light off, turn it on again and it will switch to the next output mode. Repeat this process to continue switching through the modes. If the light is turned off for over 1.5 seconds, the circuit will be reset and the light will default to its primary mode the next time it is turned on.
The Fenix LD10 is digitally regulated and digitally controlled. It runs on a standard AA battery and has two output modes which produce a total of six levels of output. These modes not only allow the user to select the best output and runtime for any given task, but they also help to aid in an emergency. The LD10 does all this and still retains a very compact size. If you're looking for solid reliability, digitally-regulated brightness, and compact size, this Fenix is for you.
Features
Cree 7090 XR-E LED
Two modes of output, selected by turning the bezel:
General Mode: 9 lumens (34hrs) -> 47 lumens (6hrs) -> 94 lumens (2.2hrs) -> SOS
Turbo Mode: 120 lumens (1.5hrs) -> Strobe
17 days of survival use (2 continuous hours per day on the lowest setting)
Digitally regulated for constant brightness
Uses one 1.5V AA ( Alkaline, NiMH, Lithium ) battery (not included), inexpensive and widely available
100mm (L) x 21.5mm (D)
Made of T6 aircraft-grade aluminum
Durable Type III hard-anodized finish
50-gram (or 1.7 oz) weight (excluding batteries)
Water-proof to IPX8 standard
Toughened ultra clear glass lens with AR coating
Push-button tail cap switch
Capable of standing up securely on a flat surface to serve as a candle
Includes a holster, a lanyard, two spare o-rings, and a rubber switch boot
This product comes with a textured reflector
Operation
Press the tailcap button until you hear a click to turn the light on and turn the bezel to select the mode. A fully-tightened head will select Turbo Mode (highest output), and a loosened head will select General Mode. Soft-pressing the tailcap button while the light is on will change the output level of the selected mode. Turn the light off for over two seconds and the circuit will reset.
The Fenix LD20 is digitally regulated and digitally controlled. It runs on two standard AA batteries and has two output modes which produce a total of six levels of output, max output is 180 lumen. These modes not only allow the user to select the best output and runtime for any given task, but they also help to aid in an emergency. The LD20 does all this and still retains a very compact size. If you're looking for solid reliability, digitally-regulated brightness, and compact size, this Fenix is for you.
Features
Utilizes a Premium (Q5) Cree 7090 XR-E LED with a life of 50,000 hours
Two modes of output, selected by turning the bezel (patented)
General Mode: 9 lumens (71hrs) -> 47 lumens (13hrs) -> 94 lumens (5hrs) -> SOS
Turbo Mode: 180 lumens (2hrs) -> Strobe
36 days of survival use (2 continuous hours per day on the lowest setting)
Digitally Regulated for Constant Brightness
Uses two 1.5V AA ( Alkaline, NiMH, Lithium ) batteries (not included), inexpensive and widely available
150mm (L) x 21.5 mm (D)
Made of T6 aircraft grade aluminum
Durable Type III hard anodized finish
56-gram (or 2.0 oz) weight (excluding batteries)
Waterproof to IPX-8 Standards
Toughened ultra clear glass lens with AR coating
Push-button tail cap switch
Capable of standing up securely on a flat surface to serve as a candle
Batteries not included
Includes a holster, a lanyard, two spare o-rings, and a rubber switch boot
This product comes with a textured reflector
Operation
Press the tailcap button until you hear a click to turn the light on and turn the bezel to select the mode. A fully-tightened head will select Turbo Mode (highest output), and a loosened head will select General Mode. Soft-pressing the tailcap button while the light is on will change the output level of the selected mode. Turn the light off for over two seconds and the circuit will reset.
The Fenix PD20 is digitally regulated and digitally controlled. It runs on one standard CR123A battery and has two output modes which produce a total of six levels of output, max output is 190 lumen. These modes not only allow the user to select the best output and runtime for any given task, but they also help to aid in an emergency. The PD20 does all this and still retains a very compact size. If you're looking for solid reliability, digitally-regulated brightness, and compact size, this Fenix is for you.
Features
Cree XP-E LED (R2) with lifespan of 50,000 hours
Two modes of output general/turbo - modes selected by turning the bezel:
Premium Type III hard-anodized anti-abrasive finish
Waterproof to IPX-8 Standard
Toughened ultra-clear glass lens with anti-reflective coating
Push-button tail cap switch
Capable of standing up securely on a flat surface to serve as a candle
Anti-roll, slip-resistant body design
Included accessories: lanyard, two spare o-rings, body clip, and a rubber switch boot
This product comes with a textured reflector
Operation
Press the tailcap button until you hear a click to turn the light on and turn the bezel to select the mode. A fully-tightened head will select Turbo Mode (highest output), and a loosened head will select General Mode. Soft-pressing the tailcap button while the light is on will change the output level of the selected mode. Turn the light off for over two seconds and the circuit will reset.
The Fenix PD30 is digitally regulated and digitally controlled. It runs on two standard CR123A batteries and has two output modes which produce a total of six levels of output, max output is 235 lumen. These modes not only allow the user to select the best output and runtime for any given task, but they also help to aid in an emergency. The PD30 does all this and still retains a very compact size. If you're looking for solid reliability, digitally-regulated brightness, and compact size, this Fenix is for you.
Features
Utilizes a Premium (R2) Cree 7090 XP-E LED with a life of 50,000 hours
Two modes of output, selected by turning the bezel
General Mode: 9 lumens (65hrs) -> 70 lumens (8hrs) -> 117 lumens (4hrs) -> SOS
Turbo Mode: 235 lumens (1.5hrs) -> Strobe
33 days of survival use (2 continuous hours per day on the lowest setting)
Digitally Regulated for Constant Brightness
Low Battery Indication
Uses two CR123A battery (not included)
118mm (L) x 21.5mm (D)
Made of aircraft grade aluminum
Durable Type III hard anodized finish
49g (or 1.7 oz) weight (excluding batteries)
Waterproof to IPX-8 Standard
Toughened ultra clear glass lens with AR coating
Push-button tailcap switch
Capable of standing up securely on a flat surface to serve as a candle
Battery not included
Includes a holster, a lanyard, two spare o-rings, and a rubber switch boot.
This product comes with a textured reflector
Operation
Press the tailcap button until you hear a click to turn the light on and turn the bezel to select the mode. A fully-tightened head will select Turbo Mode (highest output), and a loosened head will select General Mode. Soft-pressing the tailcap button while the light is on will change the output level of the selected mode. Turn the light off for over two seconds and the circuit will reset.
The Fenix TK12 follows Fenix's philosophy of designing innovative flashlights with a focus on ergonomic design. The TK12 offers three modes of output - Outdoor, Camping, and Hunting modes. It features an intelligent memory circuit that will default to the last used mode when you turn it on. With its 240 lumen max output and 200 meter illumination distance, the TK12 is the perfect flashlight for outdoor adventures.
Features:
Cree XR-E LED (R2) with lifespan of 50,000 hours
Three modes, two types of output for each mode, selected by turning the bezel (Patented)
The Fenix Tactical series (T) features a powerful, solid, durable, and waterproof design intended for rugged outdoor and military use, it’s as solid as a tank. The TK11 can use either two CR123A batteries or one 18650 battery with a protective circuit, and it maintains excellent constant brightness with two output modes: General mode, which can last for a whole night and can be used for general illumination, and Turbo mode, which can be used whenever high-powered light is needed – search and rescue, long-range target identification, etc.
Features:
Cree Premium (R2) 7090 XR-E LED with lifespan of 50,000 hours
Two modes of output, selected by turning the bezel:
The Fenix TK30 flashlight utilizes a Cree MC-E Quad LED, and delivers an amazing 630 lumens of brightness powered by four CR123A batteries or two 18650 rechargeable batteries (with included extension tube. Max runtime can be up to 90 hours on low. The Fenix TK30 would be a good choice for Search and Rescue and other first responders that need extremely bright light in a small package.
Features:
Cree MC-E LED with a 50,000 hour lifespan
Uses two CR123A batterys or one 18650 rechargeable battery
Uses four CR123A batterys or two 18650 rechargeable batteries (with extension tube)
Three sets of modes, two types of output for each mode, selected by turning the bezel
Performance using two CR123A batteries (runtimes longer with one 18650 rechargeable battery)
Searching Mode:
Output A - 100 Lumens / 5 Hours
Output B - 370 Lumens / 1 Hours
Camping Mode:
Output A - 12 Lumens / 30 Hours
Output B - 175 Lumens / 2.7 Hours
Hunting Mode:
Output A - Strobe / 2 Hours
Output B - 370 Lumens / 1 Hours
Performance using two 2500 mAh 18650 rechargeable batteries (with extension tube)
The Fenix TK40 is the latest addition to the TK-Series and is the first Fenix to use Cree's MC-E quad-die, a very powerful LED producing up to 630 lumens. Powered by eight AA batteries the TK40 is the world's brightest, AA-powered flashlight. Its optimized reflector enables it to throw a wall of light for over 300 meters. The TK40 has two different modes of output, each with four different levels - a total of eight different outputs with intelligent circuitry that will memorize your last-used primary mode.
Features
Cree MC-E LED with a 50,000 hour lifespan
2 Modes, 8 Total Outputs
Primary Modes (in order)
Turbo - 630 Lumens, 1 Hour
Low - 13 Lumens, 130 Hours
Medium - 93 Lumens, 11 Hours
High - 277 Lumens, 4.5 Hours
Strobe Modes (in order)
Strobe
Slow Flash
SOS
Fast Flash
Digitally regulated for constant output
Powered by eight 1.5V AA batteries - Alkaline or Ni-MH
Do not use Energizer Lithium AA cells for this light.
Can operate off just four AA during an emergency
Dimensions - 208mm (L) x 39.4mm (D)
Weight - 284g (excluding batteries)
Crafted from T6 aircraft-grade aluminum
Type-III hard-anodized finish
Waterproof to IPX-8 standard
Toughened ultra-clear glass lens with anti-reflective coating
Lumintop TD15 Terminator is a variable-output flashlight that provides four modes of light output. Maximum output is 420 Lumen and a precision reflector offers excellent throw, 200+ yards.
*Strobe can be set to come on first for Tactical applications!
Operation:
Loosen and tighten the head twice in 0.5 second to switch between normal mode and tactical mode. To operate in normal mode double twist once (loosen and tighten) to change light levels. In Tactical mode, Turbo is head tightened and Strobe is head loosened. Special memory feature remembers the last mode used when the light was turned off.
TD15 Features:
Uses CREE XP-G LED fully regulated to maximize output and runtime
Precision reflector offers excellent throw, smooth and optimized beam
Film-coated 99% high-transparent tempered glass, AR coated
Two modes by loosening and tightening the bezel twice in 0.5 second to switch.
Normal mode: low(20 Lm) - med(150 Lm) - high(350 Lm)
Tactical mode: Turbo(420 lumen) - Strobe
Durable aerospace grade aluminum body
Mil-Spec hard-anodized for extreme durability
Tactical tail cap forward switch - press for momentary-on, click for constant-on
Removable steel pocket clip
Anti-reverse protection circuit
Weatherproof and O-Ring sealed for moisture, dust and dirt
Wear resistant square threads
Stainless steel crenullated Strike Bezel and scalloped tail cap for self defensive
Intelligent memory circuitry memorizes last mode when activating the light
Combat Ring with anti-rolling design for secure hold in all conditions
Included accessories: holster, lanyard, pocket clip, two spare o-rings, and rubber switch boot.
Viking Tactics VTAC-MK4 Flashlight Mount- Offset Rail Mount for unique applications and professional use.
New Improved Design comes with a spacer sleeve that allows the user to mount Surefire E series flashlights if desired.
The Viking Tactics Light Mount was designed to give the shooter a light-weight, versatile option to mount a light on any Picatinny or Weaver rail system. This mount will allow you to mount any light with a 1” or slightly larger diameter. Even the inexpensive Surefire G2 Nitrolon will fit. The Viking Tactics Light Mount provides you a variety of mounting preferences. You can mount your light so that it is out of your field of view and activated by using a tape switch. You also may mount the light in such a manner allowing you to use the push button on the back of the light for activation.
The Viking Tactics Light Mount is made of a Modified Acrylic PVC Alloy Thermoplastic with high impact and abrasion resistant qualities.Impervious to most chemicals, solvents and oils, these highly advanced thermoplastics will not shrink and are proven to withstand the harshest environments.
