Everlast Saw Blades

10"x60T Standard Purpose Cutoff, ATB, Cross cutting hard or soft woods, 5/8" bore

10"x60T Standard Purpose Cutoff, 5/8" Bore, Triple Chip Grind

This blade is a very versatile blade and can be used in many cutting applications.  It works well cutting through hard woods, soft woods and particle board,  as well as any other material that would be considered abrasive.  Works well cutting through melamine panels giving an exceptional cut on the top side, but will chip the bottom without scoring first.  This blade can also be used to rough cut corian and plexi glass.

10"x50T Combination Saw, ATR, Ripping or Cross cutting solid woods, particle board, plywood or laminated panels, 5/8" bore

An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting.

8-1/2"x60T Mitre Saw, TCG, made especially for compound mitre machines such as Hitachi, 5/8" bore

8-1/2"x60T Mitre Saw, ATB, made especially for compound mitre machines such as Hitachi, 5/8" bore

10"x30T Glue Line Rip Saw, Triple Chip Grind, 5/8" bore

An extremely stable saw offering smoother cutting for all glue line applications on either straight or shadow line rip saws.

10"x40T Rip and Crosscut Saw, ATB, 5/8" bore

Everlast offers an alternative to the Forrest Woodworker II Blade.  This blade makes an exceptional cut for ripping and crosscutting applications.

12"x60T Combination Saw, ATR, Ripping or Cross cutting solid woods, particle board, plywood or laminated panels, 1" bore

An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting.

10"x80T Mitre Saw, ATR, 5/8" bore

Especially designed for cutting wood mouldings on all types of mitre saws.  The negative tooth design provides for the least possible grabbing of the material.  This saw is best suited for Makita, Ryobi, Craftsman, DeWalt and Hitachi machines where a thin kerf blade is required.

7-1/4" x 40T , MTC, 5/8" bore

Blade works exceptional well for the cutting of solid surface materials.  After the cut is made virtually no sanding or polishing is required.  This blade is not designed with a diamond shaped punch out.

5"x24T Astra Series Scoring Saw, Flat Top with Conical Sides, 5/8" bore

300mmx72T Astra Series Panel Saw, TCG, used on horizontal or vertical panel saws, Micro-5 tips, 30mm bore, 2 ph 7mm

10"x80T Non-Ferrous Metal, Mitre Saw, TCG, Cutting of aluminum extrusions, thin wall tubing and gage sheets with a wall thickness of 1/16"-1/8", Thin Kerf, 5/8" bore

10"x80T Non-Ferrous Metal, Mitre Saw, TCG, Cutting of aluminum extrusions, thin wall tubing and gage sheets with a wall thickness of 1/16"-1/8", 5/8" bore

220mmx64T Double Face Laminate Saw, 30° ATB, cutting of double sided materials such as Melamine, Kortron & Veneer, Micro-5 tips, 30mm bore, 2 ph 7mm

10"x80T Mitre Saw, ATR, Finished cutting for wood mouldings, 5/8" bore

12"x80T Mitre Saw, ATR, Finished cutting for wood mouldings, 1" bore

12"x80T Mitre Saw, ATR, 1" bore

Especially designed for cutting wood mouldings on all types of mitre saws.  The negative tooth design provides for the least possible grabbing of the material.  This saw is best suited for Makita, Ryobi, Craftsman, DeWalt and Hitachi machines where a thin kerf blade is required.

12"x80T Non-Ferrous Metal, Mitre Saw, TCG, Cutting of aluminum extrusions, thin wall tubing and gage sheets with a wall thickness of 1/16"-1/8", 1" bore

12"x80T Non-Ferrous Metal, Mitre Saw, TCG, Cutting of aluminum extrusions, thin wall tubing and gage sheets with a wall thickness of 1/16"-1/8", ThinKerf, 1" bore

10"x80T Plex-Cut, MTC, cutting of plastics such as acrylic, plexiglass, lucite, ABS, lexan and PVC pipe, good for material thickness up to 3/8", 5/8" bore

220mm x 64T, MTC, 30mm bore with 2 pin holes of 7mm, Micro-5 tips

Blade works exceptional well for the cutting of solid surface materials.  After the cut is made virtually no sanding or polishing is required.

10" x 80T , MTC, 5/8" bore

Blade works exceptional well for the cutting of solid surface materials.  After the cut is made virtually no sanding or polishing is required.

12"x80T Ferrous Metal Saw, steel bars, rebars, angle iron, steel channel, flat steel, aluminum bars, flat stock, 1" bore

10"x80T Double Face Laminate Saw, 30° ATB, cutting of double sided materials such as Melamine, Kortron & Veneer, Micro-5 tips, 5/8" bore

12"x100T Double Face Laminate Saw, 30° ATB, cutting of double sided materials such as Melamine, Kortron & Veneer, Micro-5 tips, 1" bore

12" x 100T, MTC, 1" bore

Blade works exceptional well for the cutting of solid surface materials.  After the cut is made virtually no sanding or polishing is required.

14"x72T Ferrous Metal Saw, steel bars, rebars, angle iron, steel channel, flat steel, aluminum bars, flat stock, 1" bore

300mm x 100T, MTC, 30mm bore with 2 pin holes 7mm, with Micro-5 tips

Blade works exceptional well for the cutting of solid surface materials.  After the cut is made virtually no sanding or polishing is required.

8"x24T Dado Set with 4 chippers, 5/8" bore

16"x120T Countertop Saw, MTC, chip-free cuts on laminated post form countertops with backsplash, suited for Midwest Automation and Edgetech, 1" bore

8"x40T Fine Tooth Dado Set with 4 chippers, 5/8" bore

Used for plywood, Melamine or where a smooth dado cut is needed.