Condor MA19 Double M4/M16 Open Top Mag Pouch
Size : 5.5" H x 6.25" W
Color :O.D., Black, Coyote Tan, ACU, Multicam

Condor MA27 Open Top M4/M16 Triple Mag Pouch
Size : 9.5" H x 6.25" W
Color : O.D., Black, Coyote Tan, ACU, Multicam

Condor MA6 Double AR/AK Mag Pouch
Size : 7 1/2" H x 6 1/2" W x 3 1/2" D
Color : O.D. BK, Coyote Tan, ACU, Multicam

•  Lithium CR123 Battery
  
• Note* this item is not available for shipments outside the USA
• (batteries may be from various manufactures)

Description :
- Ambidextrous shoulder/waist strap for left and right hand usage.
- Build-In Hydration Compatible Pocket. (bladder is not included)
- Zipper Closure Concealment Pockets, with Hook and Loop Panel.
  (for UH1 Holster, Sold Separately)
- Double Zipper Pulls on ALL Three Compartments.
- Compression Straps on Top and Side.
- Padded Mesh Back Panel.
- Heavy Duty Webbing Over Entire Pack and Inside of Main Compartment 
  for Attachment.
- Two outer layer with multiple compartments and slots.

Size : 13" H x 18" W x 7" D
Color : O.D., Black, Coyote Tan, ACU, Multicam

- 3 exterior and one interior pouches - Removable padded center divider for additional rifle - Hide away/detachable shoulder straps

Size : 11 1/2" H x 50" W x 5" D

Color : O.D. BK, Coyote Tan, ACU, Multicam

The Fenix TK40 is the latest addition to the TK-Series and is the first Fenix to use Cree's MC-E quad-die, a very powerful LED producing up to 630 lumens. Powered by eight AA batteries the TK40 is the world's brightest, AA-powered flashlight. Its optimized reflector enables it to throw a wall of light for over 300 meters. The TK40 has two different modes of output, each with four different levels - a total of eight different outputs with intelligent circuitry that will memorize your last-used primary mode.

Features

 

Cree MC-E LED with a 50,000 hour lifespan

2 Modes, 8 Total Outputs

Primary Modes (in order)

            Turbo - 630 Lumens, 1 Hour

            Low - 13 Lumens, 130 Hours

            Medium - 93 Lumens, 11 Hours

            High - 277 Lumens, 4.5 Hours

            Strobe Modes (in order)

            Strobe

            Slow Flash

            SOS

            Fast Flash

Digitally regulated for constant output

Powered by eight 1.5V AA batteries - Alkaline or Ni-MH

Do not use Energizer Lithium AA cells for this light.

Can operate off just four AA during an emergency

Dimensions - 208mm (L) x 39.4mm (D)

Weight - 284g (excluding batteries)

Crafted from T6 aircraft-grade aluminum

Type-III hard-anodized finish

Waterproof to IPX-8 standard

Toughened ultra-clear glass lens with anti-reflective coating

Push-button tailcap switch

Stands on end to operate as a candle

Batteries not included

This pant features the same great fit, functionality and durability as our Elite Cargo Pant, but without the two lower leg cargo pockets found on the Elite Cargo Pant.

Manufactured of fade resistant, rugged 8.5 oz. 100% cotton canvas.
Treated with DuPont Teflon® Fabric Protector for a breathable, durable barrier that repels both water and oil-based spills.
10 strategically placed multi-use pockets: 4 flapped pockets, 4 oversized open pockets and 2 back wallet/ID “bag” pockets.
2 back wallet/ID pockets hold wallet/ID in a normal position, instead of allowing the wallet/ID to drop down to an uncomfortable spot on the back of your thigh.
Slim, flapped utility pockets on each upper thigh holds a cell phone, wallet, knife, pistol magazines, cuffs or even a 30-round AR-15 magazine.
Wide front pocket openings allow the concealed carry of a small frame revolver or auto.
Critical seams are double-needle stitched and bar-tacked at stress points.
Side elastic panels in waistband for all-day comfort and freedom of movement.
Concealed brass zipper front fly along with a metal tack-button closure.
Reinforced 2” belt loops.
Easy care: machine wash, tumble dry and cool iron as needed.
Even waist sizes 28"-48". Inseam even sizes 30"-36".

 

Fabric Specifications:

• 8.5 oz. 100% cotton canvas, reactive dyed and garment-washed
• DuPont Teflon® Fabric Protector
• Double-needle stitching and bar-tacking at stress points

- Release pull provides the ability for rapid removal. - Release pull adapts to left or right shoulder. - Heavy weight webbing over the entire vest for modular attachments.. - Internal sleeves for both soft armor and plate front and back. - Plate pocket measures 13"H x 10"W x 1"D - Emergency drag handle. - Lightly padded mesh interior for comfort and airflow. - Adjustable in girth and height. - Hook & Loop area in front and back.

Size : M-XL Adjustable

Color : O.D. Black, Coyote Tan, ACU, Multicam

Lumintop - Lumintop L1C Variable-Output LED Flashlight

• Lumintop L1C Outdoors Flashlight is an ultra compact, variable-output flashlight featuring a super bright CREE XP-G R5 LED rated at 230 Lumen
  
• *Strobe can be set to come on first for Tactical applications! 

   

  Features:

  Use CREE XP-G R5 LED regulated to maximize output and run time

  Precision reflector creates smooth, optimized beam

  Coated tempered window resists impact, 98% Transmission of light, protect the reflector and LED

  Five output mode by loosen and tighten the bezel to switch - low, middle, high, strobe and SOS.

  High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability

  Tactical tail cap switch - press for momentary-on, click for constant-on

  High ductility steel two-way clip provides multiple carry options

  Anti-reverse protection circuit design

  Weatherproof O-Ring sealed that keep moisture, dust and dirt outside of your flashlight

  Wear resistant square thread

  Stainless steel crenulated Strike Bezel and stainless steel tail cap provide further defensive options.

  Intelligent memory circuitry memorizes last mode when activating the light.

  Included accessories: holster, lanyard, body clip, two spare o-rings, and a rubber switch boot.

   

  Specification:

  Bulb: CREE XP-G R5 LED

  5 Modes: Low-Medium-High-Strobe-SOS

  Max Output / Run time: 230 lumen / 1 hours*

  Middle output / Run time: 70 lumen / 6.5 hours*

  Low output / Run time: 5 lumen / 68 hours*

  Length: 3.50 inches (89mm)

  Bezel Diameter: 1.04 inches (26mm)

  Body Diameter: 0.75 inches (19mm)

  Weight: 1.8 ounces (50g)

  Waterproof: IPX-8

  Battery Type: 1 x CR123A Lithium or 3.7V Rechargeable Li-ion 16340 battery.

   

  *Output & run times based on one CR123A 1500mAh Lithium battery

• Batteries not included

FREE SHIPPING on this item (USA Destination Only)

• The M2SC4 utilizes Cree MC-E K‐Bin Neutral White quad-die, a very powerful LED producing up to 700 lumens at the emitter. The M2 uses a simple rotary interface to select from 4 different modes. EagleTac designed a parallel battery orientation, allowing for a shorter design while providing enough power to run for quite a long time.
  
• *SPECIAL*Free Diffuser lens and Optional M25 Clicky replacement kit. This feature will give you a rear tactical button with on/off in any desired mode. *Available while supplies last!
  
  
• Updated UI (user interface) - Choose your last mode - Turbo, Tactical Strobe, Slow Strobe or SOS. To change modes - From off turn on fully then turn off and back on fully within two seconds to cycle through modes. Once you find the mode you want leave on for more than two seconds to memorize the mode.

   

  The M25 Replacement Kit includes:

  1 x M25 Clicky Tail

  1 x M25 Clicky Module

  1 x Retainer Ring (Pre-installed)

  1 x Silicon Tail-Cap Boot (Pre-installed)

  1 x Custom Fitting oring for water-proof

  Spare Stainless steel mounting screws

   

  Beam characteristics: Good balance of Flood with moderate throw

   

  Operating the M2 is simple. At the base of the head is a digital rotary switch made from reinforced polycarbonate coated with smooth rubber. You just rotate the rubber ring to select the mode of output that you want:

   

  Features:

  • Quad‐die Cree MC-E K‐bin Premium Neutral White LED emitter with up to 700 lumen
  • Constant Current Regulation Output C2800 Light Engine
  • Gold Plated Copper Contacts for Superior Conductivity and Durability
  • ET54 Aluminum Optical Reflector with mild OP finish
  • Battery Options: 4 - CR123A or 2 - 18650 Li-ion Rechargeables
  • All‐in‐One Digital Rotary Switch with Off Position and Tactical Strobe
  • ‐ Rotary Switch made in Re‐enforced Polycarbonate with Smooth Rubber Coating
  • Output Levels : Strobe > 700 lumen > 360 lumen > 150 lumen > 40 lumen > Off
  • Runtime (4x123A): Strobe > 1.2hr > 3.5hr > 9.5 hr > 45hr > Off
  • Runtime (2x18650): Strobe > 1.5hr > 4.5hr > 12.5 hr > 55hr > Off

  Dimensions:

  Bezel - 2.4"

  Body -  1.5" x 1.0"

  Length - 6.3" (M2X) 6.4" (M2)  

   

  Weight: 12 ounces (340 grams)

   

  Base Model Included accessories:

  Spare O-rings, Stainless Steel Bezel (installed), CR123A Battery Magazines, Aluminum re-enforced Battery Tray, Mil-spec Para-cord Lanyard with quick detach ability, Heavy Duty Nylon Holster w/ Flip and quick detach ability, User Manual, Diffuser Filter
• Batteries not included
   

FREE (USA) GROUND SHIPPING ON THIS ITEM

EagleTac M3C4 is the next generation in the Military Series replacing the EagleTac M2. The EagleTac M3C4 is a compact 11 Watt high output LED flashlight offering 1000 Bulb lumen with 800 O.T.F. lumen at turbo mode (SST-50 and triple XP-G R5 models) and a maximum of 100+ hours regulated runtime at the 15 lumen low output mode.
 

O.T.F. lumen output:

Triple CREE XP-G Cool White R5 LED: 15/55/172/393/800

 

Typical runtime:

1.5/3.5/8/28/100+ hours

 

Operation: Dial the operational ring to turn the flashlight on/off, adjust between the five brightness levels, and access the three hidden modes (strobe, fast beacon, SOS). To access the hidden blinking modes, turn the ring from the turbo mode to the off/standby mode, then back to the turbo mode within 2 seconds to cycle through the hidden modes.

 

 

New one-piece flashlight head design (from the top of the knurling area to the battery contact point behind the head)

This allows optimal LED hea tsink capability and operational reliability. The flashlight head is not sealed and user can gain access to the inside of the lens and reflector.

 

New durable hard HAIII anodized coating

 

The EagleTac Flashlight head and the body are o-ring and square-ring sealed for operation in harsh and wet environments. Reverse battery polarity protection has been implemented on the battery tray for each battery channel. The water-proof tail-cap now uses stainless steel 304 mounting screws with hex heads.

 

 

Included accessories:

CNC machined 304 Stainless steel bezel

Diffuser filter

Para-cord lanyard with pocket clips and split ring

M series nylon holster

Batteries not included

Fully adjustable stock and comb for AR-15/M16/AR-Style .308 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber butt pad seats securely onto your shoulder and won’t slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a mono-pod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position.
AR-Style .308 model in black only.

The Magpul PRS (Precision Rifle/Sniper) – AR15/M16 Model is a drop-in, precision-adjustable butt stock for rifles with A1/A2 fixed stocks. Designed to offer the fine-tuned, customized feel of a precision target stock, the PRS is adjustable for both cheek riser height and length-of-pull without sacrificing the durability necessary to withstand the operational environment. Compared to the A2 stock, the PRS can shorten the LOP by 0.25" or extend it by 0.75". Machined aluminum adjustment knobs feature positive-locking click detents to maintain position under recoil and allows easy, tool-less adjustments by simply rotating the knobs. Machined aluminum butt-plate and alloy steel adjustment shaft provide stability and strength to withstand severe impact conditions. Rubber butt-pad offers positive shoulder purchase to prevent slippage for optimal accuracy even with body armor or modular gear. Bottom Picatinny-type rail allows for mono-pod use, additional sling mounts or storage. Stock includes all mounting hardware for A1/A2 type rifles with fixed stock.

NOTE: The PRS is a direct replacement for an A1 or A2 fixed stock. Fitting to a Carbine will require a Rifle Receiver Extension tube, Rifle Buffer and Spring (not included).
DO NOT USE THE PRS AR15/M16 ON AR10-TYPE RIFLES DUE TO CHARGING HANDLE CLEARANCE ISSUES! Please order the the AR10/SR25 PRS:

Features

• Mounts to Rifle Receiver Extension tube without A2 Spacer (not included)
• Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
• Machined aluminum adjustment knobs with positive locking click detents
• Black phosphate coated solid steel adjustment shafts
• Bottom Picatinny-type rail with removable cover for use with mono-pod
• Sling Mounts
  
  • Front/Rear - 1.25" sling loop (left-right reversible)

Specifications

• PRS AR15/M16 Stock
  
  • Weight, w/ Rifle Receiver Extension: 1.85 lb.
    
  • Length, Stock: 10.45-11.45 in.
    
  • LOP Adjustment: ~39 Clicks (0.026 in. / click)
    
  • LOP Adjustment Range: 1.00 in.
    
  • LOP, Min: 13.3 in.
    
  • LOP, Max: 14.3 in.
    
  • Cheek Height Adjustment: ~29 Clicks (0.026 in. / click)
    
  • Cheek Height Adjustment Range: 0.75 in.

The Magpul UBR (Utility / Battle Rifle), U.S. Patent 6651371, is a fully-featured, adjustable butt stock for the AR15/M16. Unlike typical collapsing stocks, this modular design offers the stability of a fixed stock with consistent cheek weld in any position. Seven-position length-of-pull (LOP) adjustment is quickly executed with gross motor movement while the integral preset system allows direct access to a preferred position. A robust lock mechanism and multi-shell construction increase durability under severe impact conditions experienced during malfunction clearing and accommodates large-bore AR calibers with ease. The UBR also provides extra counterbalance weight to improve handling on full-length rifles and weapons with muzzle-heavy accessories or bull-barrels. Optional components such as dual-side sling mounts and metal strike plate allow the UBR to adapt to the mission at hand.

Made in U.S.A.